Tweet
We are going for gold on this build. And heres the list so far....
97 SC2T Project
Engine: Fully Balanced and Blueprinted
1) 97 Block w/ Thrust bearing oiler
2) 2003 Crank Polished and Custom Oiling
3) Scat H Beam Rods
4) Wiseco 8.8:1 .020 Overbore
5) ARP Head Studs
6) 97 SRT Race Head, fully Ported n Polished, .060 Spring Shims , high temp valve stem seals / FSR Turbo Cams
7) Fidanza Adjustable Cam Gears
8 ) SRT Ram Horn Turbo Race Manifold
9) 4 AN Stainless Steal Braided Feed line, 10 AN Kevlar Drain line
10) SRT Intake Manifold With 3 in Thottle Body
11) SRT Full Race High Capacity Oil Pan
12) Huge Oil Cooler
13) Melling Oil Pump
14) SCE Integral Combustion Seal (ICS) Gasket Thanks Tristan !
15) O ringed Block
16) SRT Vaccume Block
17) Oil Catch Can
1
2 10in Slim Line FansUnfortunatly FSR/QuikSL2 backed out on the intake manifold. It went from "you'll need to do some work to it" Then it was "I need to get it flow tested, and that might take a few mons." To if we ever build a saturn itake manifold your first in line". We are now in the process of developing our own intake manifolds. Which a Full Race intake manifold will go on the "Black Widow-Maker"
Turbo Stuff:
1) T3/T04E .57 Trim Garrett Turbo
2) Turbonetics Deltagate Mark II External Wastegate
3) Turbo XS RFL Blow Off Valve
4) Bar And Plate FMIC 28x9x3
5) 2.5 In. Hot side piping , and 2.5 In. Cold side piping
6) 3 In. Downpipe, and 3in Side exit exhaust
7) 3 In. Cold Air turbo intake
Fuel:
1) Dual Msd Inline Fuel Pumps (Stock Pump Removed)
2) MS2 EMS
3) AEM WB02
4) 1000cc Injectors
5) Adjustable FPR and Fuel Pressure Gauge
Drivtrain:
1) SRT TAM and DogBones
2) ACT 6 Puck Clutch
3) Skunk 2 Coilovers
4) Front Strut Tower Brace
5) SRT Rear Strut tower Brace and Cross Brace
6) SRT Short Throw Shifter
7) Bomb Proofed Mp3 Trans, or MP2
8 ) SRT Lower Subframe Brace
Guages:
1) Megan Racing Boost Gauge
2) Megan Racing Oil Temp Gauge
3) Megan Racing Oil Pressure Gauge
4) Megan Racing EGT
5) AEM WB02
Brakes:
1) EBC Red Stuff Pads
2) Slotted Rotors
3) Stainless Braided Lines
IC on top is for this project, one on bottum is for my daily driver "Black Betty"
Gauges, and it will have a FP gauge under the hood
Yes a real Turbo XS RFL BOV
SCE head gasket
4 an Stainless feed, front brake lines, and 10an kevlar drain line
38mm wastegate
8.8:1 .020 over Wiseco's
More pics to come [img]{SMILIES_PATH}/icon_twisted.gif[/img]
Comment