The FunkyMonkey build profile. multi-stage

[funkymonkey]

well, i have all these pictures and all this werk going on, i figured id share a little and seek some input.

-shes a 94 SC2 converted to a manual.
-an original design manifold by titan if i rember right, got from Ian
-currently running a straight T3 off a mercedes deisel
-1.5 inch pipes upgraded to 3 inch pipes and a massive ebay intercooler.
-honda dual core radiator.
-knock off tial 52mm BOV.
-megasquirt 1 ver 2.0 running 42lb injectors. bout to start edis build.
-saturn motorsport racing seats, with 4-point harnesses.
-rear disc conversion.

-oh ill add more as i go....

now for some pictures

[funkymonkey]

Re: The FunkyMonkey build profile. multi-stage

and the first turbo build up.
thanks Joe, Tristan, and Jayson Stork

























out with the old....... in with the new:

[funkymonkey]

Re: The FunkyMonkey build profile. multi-stage

[funkymonkey]

Re: The FunkyMonkey build profile. multi-stage

this is how you clean this stuff out



The new home





As she currently is sitting. gonna do one of them wire tucks and such



oh, i gottta do somethiing with this

[Starrsaturn]

Re: The FunkyMonkey build profile. multi-stage

Looks like a pretty solid start, looking forwards to lending a hand getting her up and running...
so, were gona have two german turbo saturns in the pittsburgh area, thats scary,
wonder when they are both going to get off of the jack stands.

[funkymonkey]

Re: The FunkyMonkey build profile. multi-stage

some nice new items,
got me a nice mp3 tranny for the longer gears, thanks starrsaturn.
and a different master cylinder to help the charge piping clear near the throttle body.




oh and this came today......
thank you daspirate and FSR motorsports.
this will be stage two turbo build. stage three will feature the twin disc McLeod clutch with a much larger turbo.

[JRSTANGE]

Re: The FunkyMonkey build profile. multi-stage

very cool. do you still have two of mikes manifolds?

[funkymonkey]

Re: The FunkyMonkey build profile. multi-stage

welp. been mulling over some ideas and finally got some motivation that the garage is cleared out a bit.
gonna start on the wiring, and since this is gonna be run on a megasquirt with the ford edis setup, i started pulling out all the factory stuff.
gonna dig out the edis hardware, and order some custom plug wires and mount it on the side where the resivoirs were.

oh, and this is just a mock up engine.... final engine is still wrapped in plastik. awaiting rings and bearings. and hopefully ian is making me my intake manifold.


the think they call the rats nest.......



look how simple this gets.......

[Evil3yeSc2]

Re: The FunkyMonkey build profile. multi-stage

very nice

[funkymonkey]

Re: The FunkyMonkey build profile. multi-stage

welp, finally got some motivation to get her started again.

pulled out one of the preped blocks and popped a new head on.

got things mocked up and the down pipe welded in.

only clearance issue was the turbo intake is like 1 mm away from the back of the waterpump area.

but thats ok, i just gonna put a screen with a band clamp on her.

[geod919]

Re: The FunkyMonkey build profile. multi-stage

You could file that corner off, it's not like you need an a/c mount lol.

[SC_EXTREME]

Re: The FunkyMonkey build profile. multi-stage

looks good