Announcement

Collapse
No announcement yet.

AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

    A few people recommened that I start a thread on these. If you purchased the Progress Swaybar and do not want to drill into your subframe then purchase our bushings. This is how it should have been done, and what you should do rather than drilling into your subframe. I had told quite a few people that you were very likely going to have to drill into your subframe cause we are the ONLY company that makes a true 100 percent bolt on swaybar kit for this chassis!! I mean bolt on! NO drilling, nada! We make and offer everything down to the proper bushings, beefy CNC swaybar brackets....everything to do it right.

    So for those guys who don't want the hassle, purchase these swaybar bushings, which I have made locally here in town for both 19mm and 22mm swaybars! This is for a hassle free install. Well not quite hassle free since the rear swaybar can be a pain to install, but this will definately help.


    30 shipped for 1-10 people
    28 shipped for 10+ people

    The list will be open for 2 weeks. Once I get a list of people who want to purchase them I will have another batch made.

    Our paypal address when payment time comes is [email protected]

    Also our swaybars 19mm and 22mm are in stock and are 165 shipped BUSHINGS INCLUDED.



    19mm List
    slipperysc2
    zerg1024
    grnsl2dude
    noanoxan
    Cobra
    ghammer
    saturntech95

    17.5mm List
    Frostman
    Xyla95
    www.amrengineering.com
    www.facebook.com/amrengineering
    www.instagram.com/amrengineering
    E-mail [email protected]
    Contact Number: 1-888-826-6906

  • #2
    Re: AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

    Your sway bars, 19mm and 22mm, those are 4 way adjustable or 3 way?
    Black 2006 Cobalt SS/SC
    ZZP | GMPP |EBC |GM Stg2

    Comment


    • #3
      Re: AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

      3 way adjustable. I can make them 4 way adjustable, but it would not be practical for me at this time since the brackets have been already cut for 3 adjustments.
      www.amrengineering.com
      www.facebook.com/amrengineering
      www.instagram.com/amrengineering
      E-mail [email protected]
      Contact Number: 1-888-826-6906

      Comment


      • #4
        Re: AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

        Add me to the list for a set of 19mm bushings.

        Might grab a swaybar kit for the dd from you too, but not for a few weeks.
        98 P.O.SC2 5 Speed- Fail on wheels/ semi-permanent lawn ornament
        02 SL1- Manual swapped, still slower than molasses on the south pole

        Sixthsphere: The only place where respect comes from fast, clean turds.

        Comment


        • #5
          Re: AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

          All good bro, I am trying to keep as much stuff I can in stock with the backlog of work we have. Right now we have both in stock at this time.
          www.amrengineering.com
          www.facebook.com/amrengineering
          www.instagram.com/amrengineering
          E-mail [email protected]
          Contact Number: 1-888-826-6906

          Comment


          • #6
            Re: AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

            yo hook me up wit a 19mm.

            Comment


            • #7
              Re: AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

              i could use the 19mm bushings

              Comment


              • #8
                Re: AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

                PM'd
                2013 Mazda 3 / 2013 Ninja 300

                Comment


                • #9
                  Re: AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

                  need to make 24mm ones
                  Originally posted by ECOtec Gods
                  Consider this: 800 hp is a lot on a 2.0L motor. With 750hp, three-quarters of a thousand you're basically dealing with 6.14 hp per cubic inch. Pressures and stresses of all kinds thermal and mechanical loading across the board escalate to extreme levels. A Chevrolet 5.7-liter LS1 V8 with this much specific power (horsepower per cubic inch) would be making 2,137 hp

                  Comment


                  • #10
                    Re: AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

                    put me down for a 19mm set too.

                    are they gonna be that blue color? just wondering. I don't really care what color they are, I've just never seen translucent blue bushings. I was gonna ask you in the progress thread, but I figured I'd wait till you started this thread.
                    96 sc2m - whore.
                    - $3.7k to go till completion..

                    Comment


                    • #11
                      Re: AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

                      Yah they will most likely will be blue again. We are going to make a batch maybe in black or red later, but we need to go through our first batch first.
                      www.amrengineering.com
                      www.facebook.com/amrengineering
                      www.instagram.com/amrengineering
                      E-mail [email protected]
                      Contact Number: 1-888-826-6906

                      Comment


                      • #12
                        Re: AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

                        Any chance you could make a set of 17.5mm's I have an old SPS bar but no bushings for it, and If you could hook me up It would be grand.
                        sigpic
                        -Walker - 2006 Volvo V70R
                        1995 SC2 - Killing me slowly -

                        Comment


                        • #13
                          Re: AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

                          It'll cost a lil more, but I am sure my guy can do it. If I can get a pair made for let say 35 bucks shipped would you take it?
                          www.amrengineering.com
                          www.facebook.com/amrengineering
                          www.instagram.com/amrengineering
                          E-mail [email protected]
                          Contact Number: 1-888-826-6906

                          Comment


                          • #14
                            Re: AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

                            yep I sure would.
                            sigpic
                            -Walker - 2006 Volvo V70R
                            1995 SC2 - Killing me slowly -

                            Comment


                            • #15
                              Re: AMR Engineering 19mm and 22mm Swaybar Bushings-Uses Factory Housing!

                              i NEVER DONE ONE OF THESE BUY IN THINGS SO HOWS THIS WORK BECAUSE IM REALLY INTRESTED...GOT MONEY TO BLOW...LOL
                              Bitch I'm Fucking This Monkey... You Just Hold The Tail!!!!

                              Comment

                              Related Topics

                              Collapse

                              There are no results that meet this criteria.

                              Working...
                              X