Announcement

Collapse
No announcement yet.

which motor mounts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • which motor mounts

    which motor mount do the prothane inserts fit into?
    01 Silver SC2

  • #2
    00-02 stamped steel dogbone mounts
    -Vinny

    Comment


    • #3
      will they fit my 92 SL?.....i used to know this stuff but ive been drifitng away from the saturn community since ive started college

      thanx
      01 Silver SC2

      Comment


      • #4
        yes they will fit, HOWEVER on 91's I know for sure they have a funky piston style mount under the crank pulley instead of a dogbone. they also have no TAM. I want to say that the 92's are like that also, but I forget off the top of my head. I am sure someone will chime in and verify this.
        -Vinny

        Comment


        • #5
          I've never seen a 92 with the piston/cable mount
          [16:02] Ferrari166mm: so you&#39;re finally getting into real cars.<br />[16:02] adamkob32: I&#39;ve just had enough of racing a 100HP nutsack
          <br /><br />

          Comment


          • #6
            well like I had said, I know it was on 91's but I don't know for sure if 92's had them. I want to say yes but I might be wrong.
            -Vinny

            Comment


            • #7
              well i hav SDA's on now (if that helps [img]{SMILIES_PATH}/icon_question.gif[/img] )....im just replacing them with the prothane ones......only prob is that i need a pair of dogbones to fit the pair of prothane inserts i have
              01 Silver SC2

              Comment


              • #8
                well they yeah you're fine they'll fit just the same

                how bad/worn are the SDA's?
                -Vinny

                Comment


                • #9
                  Why would you replace them..? The SDAs are the best on the market.

                  But hell, if you're replacing them, I'll buy your old SDAs from you. I'm buying a new project car that'll need them.. [img]{SMILIES_PATH}/smile.gif[/img]
                  - Justin [s]99 Blue SL2 - T3/T4 14psi[/s] (dead)


                  FS: Pimped lower trans mount, TiAL 38mm Wastegate, Gauge Cluster, Oil Drain

                  Comment


                  • #10
                    no justin....you have some already...i need em...lol
                    1995 Saturn SW2: Crushed
                    1995 Saturn SW2: Lower Than You


                    Comment


                    • #11
                      well i dont mean to rat on them...cuz they are good people, a good company, and make quality parts....but when i bought them, for some odd reason when i went to put the bolts into the holes on the mount there was WAY too much play between the bolt and the hole.......so i attempted to press (what i would call) "shims" into the hole to kind of close the gap around the bolt...my automotive teacher even thought that the gap was strange......i contacted them and they said that they never had any complaints about them so i just kept them the way i had them......and now im goin to replace them

                      so i prob wont sell them for the simple fact that i dont know how reliable they are since i pressed the "shims" into the mount...sry
                      01 Silver SC2

                      Comment


                      • #12
                        Hmm.. ok. I have a 99 sl2, and when Craig and I installed mine, we had a LOT of play as well. However, screwing the bolts in tight made it so there wasn't really any way to pull on it.. so idk. I've ran them for a few months now with no problems.
                        - Justin [s]99 Blue SL2 - T3/T4 14psi[/s] (dead)


                        FS: Pimped lower trans mount, TiAL 38mm Wastegate, Gauge Cluster, Oil Drain

                        Comment


                        • #13
                          yea......ive had mine for about 10 months or somethin like that....im just kinda nervous......people here at school call me a perfectionist when it comes to doing our objectives on cars......like using the little sand wheel to help take out some of the ridges from the cutter when turning the rotor....idk i like alittle extra insurance
                          01 Silver SC2

                          Comment


                          • #14
                            well shit I need a set for a project car, I'll take them off your hands dude lol

                            I understand where you're coming from though
                            -Vinny

                            Comment


                            • #15
                              Originally posted by Schizzo97SC2
                              well shit I need a set for a project car, I'll take them off your hands dude lol

                              I understand where you're coming from though
                              Vin, I pulled two sets of the stamped mounts and sent one set to Heath. I still have the other set so, worse comes to worse, I can order another set of the poly inserts and slap them into the project car.
                              1993 SW2 - Slow and Low

                              Comment

                              Related Topics

                              Collapse

                              There are no results that meet this criteria.

                              Working...
                              X
                              😀
                              🥰
                              🤢
                              😎
                              😡
                              👍
                              👎