Announcement

Collapse
No announcement yet.

Crankshaft Regrind

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Crankshaft Regrind

    How much would it be (on average) for a crank regrind?

  • #2
    3D (the shop I use here in Tampa) charges 152 after tax. That's for regrind and matched rod and mains bearings.
    -6S Resident Mechanical Forensics member #001.
    1995 SC2 Turbo 3.6L DOHC, 6sp manual, Ford 8.8 rearend running on MS3x.
    1998 F-250 5.4L triton...stock.

    Comment


    • #3
      if the rod bearings spun, would i need to get the rods reground too? i found a set of used connecting rods on ebay in good condition for $30 shipped.

      Comment


      • #4
        They cut some of the cap off (non fracture type rods) and then re-bore the rod end so its the proper size and round....its about 60 per rods, so a set of used rods in good shape for 30 is worth it.
        -6S Resident Mechanical Forensics member #001.
        1995 SC2 Turbo 3.6L DOHC, 6sp manual, Ford 8.8 rearend running on MS3x.
        1998 F-250 5.4L triton...stock.

        Comment

        Related Topics

        Collapse

        There are no results that meet this criteria.

        Working...
        X