Help on Fuel Pressure Gauge

[RotorNutFD3S]

Just got a Cobalt Electric Fuel Pressure Gauge.
I was reviewing the instructions that AutoMeter sent with the gauge, and it's not very clear, so I thought I would ask how anyone here has installed the sender for the gauge.
It mentioned using the schrader valve on Ford systems, I don't know if we do that on ours as well, but I'm using the schrader valve already as an output to the 2 extra injectors for my SDS EIC (I just took out the little pin thing).
Thanks for any help!

[slowion2]

right, you can just put a T on it and feed the gauge that way, be it a barbed fitting on the rubber hose part or a thread on fitting with two barbs for your two needs

[RotorNutFD3S]

Ahh. OK. Cool.
Happen to know off hand what size the schrader valve is so I can do a thread on fitting with 2 barbs?

[slowion2]

shit I forget off hand, but hell grab the cap that was on it and find the right pattern/cut it threads on to, there you go