injectors Will these work

[IdahoSL2]

here you go I found these. I just want to know if they work with are SATURN'S [img]{SMILIES_PATH}/smile.gif[/img]
http://cgi.ebay.com/ebaymotors/ws/eBayI ... AMEBI%3AIT

[S.Bretz]

No

[IdahoSL2]

I thought those where the ones that fit Saturn?

[S.Bretz]

Try accle high impedacne injecotr on youru car. I ran them for many-a-moon.

[saturnspeed_12]

No

+1

those will not fit a saturn. you need something like this...........



yeah accels seem to work good. put them in my friends eclipse gs with an hrc turbo kit. since it is a gs, it has the chrysler motor so it has the "american" o-rings, large ones. injectors are 30lbs, will work in a saturn too, but need a management system to make them work properly.

[drducttape]

Correct me if I am wrong, high impedance = OBDI / Low impedance = OBDII

Been a while since I bought mine.

T.

[saturnspeed_12]

Correct me if I am wrong, high impedance = OBDI / Low impedance = OBDII

Been a while since I bought mine.

T.

96 and newer use high

[drducttape]

So it's OBDI=low impedance /OBDII=High impedance.

Thx!

T.

[S.Bretz]

Yes, but you can use the highs on the OBD1. YOu CAN"T use the lows on OBD2, bad stuff happens.

If you use an hihg resistance injector on OBD1, go up to the about 2lbs/hour flow rate over what you looked at in a low resitance injector.

[drducttape]

Good info!! Thank you.

T.