Tweet
One of my foglights blew out. I went to replace the bulb and found it to be quite dificult to get the light out. I see it is held up by a metal bracket and held to the bracket by rubber clips. However I can't get any leverage on tools in the small area inside the bumper. Oh and my fingers are freezing off. Is there an easy way to get that light out of there? I feel like a retard for asking about something so simple.
-
-Mike
-MN <br />'96 SC2 <br />Check out my website!<br />[img width=350 height=40]http://www.sixthsphere.com/storage/976/stc_banners-oakdog8.jpg[/img] -
I have often wondered how to get at my foggies but I havent needed to replace them yet. Im sure when the time comes it will suck. -
not sure how other saturns are but the 98' you just grab the electrical plug and twist. then it pops out98' SC-2 forged high compression on the bottle<br />84' Z-28 building a 383. hoping for around 500 hp on pumped gas<br />91' K1500 toy hauler but will be replaced again soon<br /><br />[img width=350 height=40]http://www.sixthsphere.com/storage/976/stc_banners-twiztidsc-2.jpg[/img]Comment
-
yeah I just got it. All I had to do was grab and twist, only there is a fat plastic support directly behind the light housing so I had to aim the light way down and then contort my wrist. Oh well.-Mike-MN <br />'96 SC2 <br />Check out my website!<br />[img width=350 height=40]http://www.sixthsphere.com/storage/976/stc_banners-oakdog8.jpg[/img]Comment
Comment