Anyone make Guage Pod Pillars for S-Series?

[detroitbass]

Just as the title says, I need a gauge pod pillar for my S-Series. Two gauges. Anyone know of one that will work?

[The Shaolin]

87-89 RX7. I posted pics somewhere.

[dream36realms]

Or FC13B [img]{SMILIES_PATH}/lol.gif[/img]

[TypeSL2]

^FC3S??

[dream36realms]

It is a joke, the RX-7 has 3 body styles(by american spec, I know the others were dif). the 1st gen is FB and 12A was it's motor, the FC is the 2nd gen, and the FD is the 3rd both with a 13B.

[RotorNutFD3S]

I didn't get the joke either.

And the pillars on all of the FCs (86-91) were the same, not just 87-89. [img]{SMILIES_PATH}/wink.gif[/img]

[conflict325]

o so it's a definate the 87-89 pods will fit the s-series perfect? Mainly 2nd gens?

[The Shaolin]

Before heatgun:


After heatgun, before trimming:




Completed:





Yes, I know it's a 3g...but it should be close.

[conflict325]

k thanx i dont have a heatgun so would need one, and how much trimming would be needed?

[The Shaolin]

I didn't have one, either. You don't need one if you don't mind it not fitting quite right.

I used one of these bad boys.



as for trimming, the back corner was too big, and I think I trimmed the inside edge just a little bit to make it pretty. I used a dremel.

[conflict325]

k thanx I will work on that. How much do those guage pillars go for?

[gravana1]

Re: Anyone make Guage Pod Pillars for S-Series?

Just as the title says, I need a gauge pod pillar for my S-Series. Two gauges. Anyone know of one that will work?

Try Lotek. (gaugepods.com)

[conflict325]

^^^^ not a website

[RotorNutFD3S]

I got a website to come up...

[gravana1]

Lotek used to offer group deals... Get 25+/- people to order and they will build a pillar pod set-up for just about anything. I have installed their Camaro, Impala and Cavalier pods. The fit is great.