Tweet
About 6 months ago I installed the aluminum faced gauges on my 01 SC2, and since then all but one light are out. I removed the 2 up top to keep them from shining on the gauges, since then I had put them back in to see if it was the problem. I didn't mind untill recently when it is always dark when I drive, can someone tell me how to fix this? Can I just use wires from the one that does work to see if I have a short in the board?
-
sigpic -
did you try replacing the bulbs that are out?
and did you use a new set of faces? or are you talking about the bezel? -
they aren't burned out. I know because everytime I move them around it is the exact same spot that is lighting up. I installed the white faced gauges off of SPS. originally I was trying to use LED's but now I just want it to work, if one bulb is out does that make all of them not work?sigpicComment
-
the others should still work if a bulb is burnt. You may have damaged something with the LED venture? I dunnoComment
-
the guy at Saturn here said if it is missing one it won't work so I'm gonna try to use a wire until one is deliveredsigpicComment
-
I'm a looser!!!!!!!sigpicComment
-
OK, I got it now, the circuit board WAS fried. I got it working now, and I had to use LED's after all( wired into switch).
[pic]1391[/pic]
[pic]1392[/pic]
alot better than having absolutely no lightssigpicComment
-
thats sweet.. i wonder if i should try and tear my dash apart to put LEDs in there.. afterall, i've got quite a few LEDs & resistors & PC boards and such sitting around.lawd it's been a long timeComment
-
lol, you can hardly see anything man lol. Go back and put foil over the white plastic or something. maybe you'll get a lil bit better reflection or something. And please tell me you cleaned up those wires some before sticking that thing back in there, lol fireComment
-
I'm gonna pull thjose bulbs and put white(multi direction LED) ones in and leave the 2 landscape bulbs bluesigpicComment
Comment