License plate ???'s

redline13

Join Date: May 2006

Posts: 104
- Share
- Tweet
#1

License plate ???'s

07-12-2006, 08:35 PM

Ok, so I was wondering if I can replace the plastic pieces that the bolts screw into to put the lisence plate on. My plate wobbles like crazy, and its because I can't tighten it as it should be because since those pieces are plastic, they are stripped. I tryed velcro (on the bottom of the plate) it worked for a while to hold it down, but once it started getting humid, all the adhesive went away. It also shakes like crazy (but that because of my system)

Any ideas guys? Has anyone had this problem before?

<br />STC - FL
<br />14.038 @ 103.38
<br />234.51whp 217.24lbs
Tags: None
AC66Bronco

Join Date: May 2023

Posts: 6471
- Share
- Tweet
#2

07-12-2006, 08:45 PM

never had a stripping issue try taken it to your dealer and yell at them (dont really yell)

as to the ratteling just turn it up thats what i do. ELEVATION FTW

Originally posted by ECOtec Gods

Consider this: 800 hp is a lot on a 2.0L motor. With 750hp, three-quarters of a thousand you're basically dealing with 6.14 hp per cubic inch. Pressures and stresses of all kinds thermal and mechanical loading across the board escalate to extreme levels. A Chevrolet 5.7-liter LS1 V8 with this much specific power (horsepower per cubic inch) would be making 2,137 hp
Comment

Announcement