Announcement

Collapse
No announcement yet.

Sixthsphere Guides

Collapse

Home

  •  
  • Filter
  • Time
  • Show
Clear All
new posts

  • Installing a ring gear on a Quaiffe LSD

    Installing a ring gear on a Quaiffe LSD

    This subject comes up now and again. I'd like to thank erbair for letting me use his Quaife for the write up. This is a pretty advanced project but if your careful anyone should be able to do this. So first things first. You have to remove your old diff. from your trans. Different Racing has a good article on there site covering this so I won't repeat. Next you Have to remove the old ring gear. I choose to cut the rivit heads off with an end mill you may choose to grind the heads off with a grinde...
    See more | Go to post

  • Ultimate Swap Guide

    Ultimate Swap Guide

    Please be aware that this guide is a work in progress. The information contained within this swap guide is believed to be correct but be aware that errors maybe present. Swap Guide Intake manifolds and fuel delivery: 91-94 Intake manifolds interchange. 95-98 Intake manifolds interchange. 99-2k Intake manifolds interchange 91-94 Throttlebodies interchange. 95-98 Throttlebodies interchange. 99-2k Throttle bodies interchange. 91-94 Fuel rails and injectors interchange. 95-97 Fuel rails i...
    See more | Go to post

  • The SAFC on Boost.

    The SAFC on Boost.

    The most important thing in using the safc when boosting I’ve found.(which might not be the case for all setups/ or eveyrone.) is to make sure you match your injectors to the amount of boost you want
    See more | Go to post

  • Adapting a DSM Turbo Manifold onto the Saturn S-Series

    Adapting a DSM Turbo Manifold onto the Saturn S-Series

    A few common things about DSM manifolds:

    - If you have a 3rd gen, all you need to do is possibly drill out one or two
    See more | Go to post

  • Removing Cams Without Removing Timing Chain

    Removing Cams Without Removing Timing Chain

    Alright, since there has been much speculation and ms paint drawings floating around, I figured I'd post up some real pics of the process. I had to do this today to remove the SDA Race Cams that were
    See more | Go to post
There are no articles in this category.
 
  • Filter
  • Time
  • Show
Clear All
new posts
Please log in to your account to view your subscribed posts.

article_tags

Collapse

There are no tags yet.

Latest Articles

Collapse

  • 3rd Gen PCM Swapping
    by SC2Sick
    Credit: Special Forces https://forum.sixthsphere.com/forum/...n-pcm-swapping


    ​ Throughout my planning of my manual swap the one question I never had a definite answer on was swapping the PCM from automatic to the manual one I bought for my 3rd gen. I was first told that you needed the BCM from the car the manual PCM was coming from and then I was told the BCM isn't necessary but it needs to be flashed by the dealer but the dealer won't do it. I was then led to an answer that...
    04-02-2020, 05:06 PM
  • Saturn Coilovers ( Subaru coilover mod )
    by SC2Sick
    ...
    11-14-2019, 07:02 PM
  • Saturn S-series Suspension - Lowering Springs
    by SC2Sick
    There are a couple of options for lowering your 1991-2002 Saturn SL SL1 SL2 SC SC1 SC2 SW SW1 SW2 SWP models

    There are good aftermarket struts available from manufacturers like KYB and Monroe that can be combined with several options for lowering springs. This is also a great time to replace your strut mounts as well as they are likely worn out if they have high miles on them. This project will also generally require an alignment afterwards as well.

    Lowering spring options:...
    11-14-2019, 06:45 PM
  • Deebs Build Saturn LL0 engine
    by SC2Sick
    A "Deebs" build is a popular, all Saturn original parts, way to make a performance engine for the Saturn S-Series platform. These parts are easy to source parts that you could easily obtain from a junkyard or salvage yard ( car-part.com ) that should net modest performance gains without too much difficulty. This can replace a Single Cam ( SOHC ) or be used in place of the later generation Twin Cam ( DOHC ) with minimal additional parts. Generally a computer swap ( see PCM/BCM security relearn...
    01-17-2017, 10:29 AM
  • 3rd Gen SC2 SL2 Universal Window Switch Installation Guide
    by slipstreamconversion
    Writeup courtesy of Megan SC2

    (*please trace the leads with a multi-meter. just trying my untested leads could damage your control board.) My 2002 SC2 power window switches have stopped working, AGAIN! I've cleaned the contacts before which helped but was never a great solution. I never had a way to restore the eroded metal on the contacts, and without fixing the contacts cleaning them was pointless. And who wants to take these things apart again? NOT ME! ...
    09-25-2015, 01:45 PM
  • Saturn L-Series Front Speaker Replacement
    by slipstreamconversion
    Saturn L-Series Front Speaker Replacement
    www.sixthsphere.com
    slipstreamconversion
    Vehicle: 2000 Saturn LW2
    ORIGINAL THREAD: http://sixthsphere.com/showthread.ph...57#post1482657
    -----


    2000 Saturn LW2 So, I have a blown speaker in my car. This guide deals with the front speaker replacement for the L-Series. Awh yeah, let's get started. (I only have pictures of the driver's side door, ...
    03-29-2014, 07:52 PM
Working...
X