SAFCII Installation on Ion 2.2L (2003-2004)

A'ight boys here it is. A (hopefully) good installation "manual" for putting the SAFC on the 2004 Ion Quad Coupe 2 - I make no guarantee this will work on any other model or year Ion. First off, you wire up the bitch to your stock ECM. Here's the wiring map I used: Note that the 'C1' block is the one that has "Delphi" stamped on it and is square in shape and closer to the driver's side / wheel of the car than the C2 block, rectangular in shape. There are a few things to note about the instal...

1) jack up car to get under to remove the oil drain plug. (15mm i think, isnt that the normal size?) make sure you have an oil pan ready. 2)let that drain and get up and stand on the left side (driver side) And remove the 2 bolts holding the coolant filler neck at the front of the car off so I could move it outta the way. 3)with your left hand maneuver the 1 1/4" (32mm) socket under the supercharger. Takes a little finesse to get it on there. 3) look from the top down and insert at least a ...

Diagnostic Trouble Code (DTC) List For The EcoTec Engine DTC Descriptor DTC B0005 In Park Switch Circuit Malfunction DTC B0016, B0017, or B0018 Right Front/Passenger Frontal Deployment Loop (Stage 1) Circuit DTC B0022, B0024, or B0026 Left Front/Driver Frontal Deployment Loop (Stage 1) Circuit DTC B0028, B0029, or B0030 Right Front/Passenger Side Deployment Loop (Stage 1) Circuit DTC B0035 ADS Closed/Shorted to Ground DTC B0036 ADS Open/Missing/Shorted to Battery DTC B0040, B0041, or B0045 Ri...

...

Submited by AC66Bronco

ORDER BULBS HERE scroll down to B8.4D select color you only need 4 bulbs First begin by making sure you have all the necessary tools needed... 7mm socket and ratchet or socket driver small flathead screwdriver small needlenose pliers 1. Begin by removing the radio trim. This can be in many ways. Some prefer to hold onto the trim where it meets and bottom of the radio and pull. Others prefer to slide a small flathead screwdriver into the edge of t...